The Eisbaer Aurora LT Solo combines CPU cooling block, reservoir and pump in one product. The low construction height allows flexible use in a wide range of scenarios. Especially in small cases with little space, the Eisbaer Aurora LT Solo can convince. The product is also used as the basis of Alphacool’s popular AiO water coolers. Radiator & Pump As with all Alphacool products, the radiator base is made of nickel-plated copper and is equipped with very fine cooling fins that are distributed over the entire base. A nozzle plate provides an accelerated flow over the cooling fins which increases the cooling performance. The water flow is optimized so that all areas of the cooler base are cooled evenly. The Eisbaer LT Aurora cooler uses the very compact and small DC-LT 2 pump. It provides enough power to add another component such as a GPU water cooler or another radiator to the circuit. Full Digital aRGB Illumination The cooler pump assembly and fans are fully equipped with Digital RGB LEDs, also known as addressable RGB or aRGB. Extensive effects can be set with the included controller or a Digital RGB controller on the motherboard. For a nice visual effect, of course, the illuminated polar bear on the cooler pump unit. For easier control via a controller, the fans and also the pump can be connected in series as a daisy chain. This enables a neat wiring of the individual LED components.   Compatibility: AMD: AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / FM1 / FM2 / FM2+ / SP3 / SP6 / sTRX4 / sWRX8 Intel: LGA 1150 / LGA 1151 / LGA 1155 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755   Technical data cooler with pump L x W x H 69 x 69 x 45mm Material cooler bottom nickel plated copper Material cooler top acrylic Threads 2x G1/4? (+ 1x Fillport G1/4?) Pump type DC-LT2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow 72 L/h Voltage 6-13,5V DC Power consumption 3,2W Pressure tested 0,8 Bar Maximum working temperature 60°C